Server environment monitoring system liquid sensor Monitor data center remotely

Home »
Server Environment Monitoring »
Environmental Sensors »
Liquid detection sensor for ENVIROMUX-SEMS-16, x = water sensor cable, y = 2-wire cable

Liquid detection sensor for ENVIROMUX-SEMS-16, x = water sensor cable, y = 2-wire cable

NTI Part #: ENVIROMUX-LDSx-y

For warning of flooding. Detects liquid depth >0.1" (2.5 mm) . Minimum puddle: 0.6" (15 mm) diameter. 100% waterproof electronics. Detects any liquid, except deionized water. RJ45 connector. Supports CAT5/5e/6 cable up to 1,000 ft. (305 m) .

For warning of flooding.
Detects liquid depth >0.1". (2.5 mm)
Minimum puddle: 0.6" (15 mm) diameter.
100% waterproof electronics.
Detects any liquid, except deionized water.
RJ45 connector.
Supports CAT5/5e/6 cable up to 1,000 ft. (305 m)
Available water sensor cable (x) lengths: 1/10/50/100/200/400/600/800/1000 feet.
Available 2-wire cable (y) lengths: 5/10/20/50/100 feet.
Powered by ENVIROMUX-SEMS-16 or SERIMUX-S-x.
Regulatory approvals: CE, RoHS
Requires the ENVIROMUX-SEMS-16 or SERIMUX-S-x to operate.

Application Notes

Detect Conductive Liquids in a Server Room

The ENVIROMUX-LDSx-y water sensor cable is available in lengths from 1 to 1000 feet (0.3 to 305 meters), and can be located up to 100 feet (30 meters) away from the sensor unit via 2-wire cable. The sensor unit can be located up to 1,000 feet (305 meters) away from the ENVIROMUX-SEMS-16 via CAT5/5e/6 cable. The water sensor connects to the 2-wire cable with a built-in connector, and the 2-wire cable connects to the sensor unit via screw terminal. If water or other conductive liquid contacts the water sensor cable, the ENVIROMUX-LDSx-y reports the detection to the ENVIROMUX-SEMS-16.

Length of Water Sensor Cable (feet) *
Length of 2-Wire Cable (feet) *

* Required Fields

Qty: